VIRTUAL-LIVE COURSE
This course is designed for currently employed repair station personnel and installers of ADS-B systems. Approximately 4.8% of all general aviation ADS-B installations are non-compliant based on the FAA’s ADS-B Performance Monitoring System. This course focuses on the proper configuration and testing of ADS-B installations to ensure your installation meets the performance requirements and regulations. Also included are troubleshooting tips and tricks that will help you resolve the common problems found in ADS-B installations.
Presented by: William Tramper
Course Objective:
To provide the student with theory of operation, installation configuration, testing procedures, and troubleshooting procedures related to ADS-B systems.
Course Goals:
- Describe ADS-B theory of operation and mandate requirements.
- Explore the FAA’s NextGen/ADS-B online tools.
- Demonstrate how to properly configure an ADS-B system.
- Demonstrate how to properly test an ADS-B installation using industry-standard test equipment.
- Demonstrate how to verify an ADS-B installation meets the FAA’s performance requirements.
- Describe basic troubleshooting procedures used to resolve common issues with ADS-B installations.
Virtual Course:
- This course will be presented live online.
- After registering, attendees will be emailed the information needed to connect.
- Attendees will be emailed the course materials in digital format.
- Attendees are required to connect with a web camera.
Frank P.
5
Take the class
Gauthier L.
5
This is a very good course, I woul suggest people to attend it.
David M.
3.4
Great tech level overview of the system.
Kushalsen B.
4.6
I would recommend this course.
Graeme R.
4.4
Best ADS-B course on the market
Taro M.
5
Very good.
Gilbert C.
4.2
definitely recommended
Brent E.
5
Review AC 20-165 prior to the course. That's helpful in understanding the material better.
Jason F.
4.6
Well rounded course full of lots of good information.
Kushalsen B.
4.6
I would recommend this course.
Charles F.
4.8
This is a quality course that will be useful to someone not familiar with ADS-B as well as a comprehensive review for those that are.
Scott H.
5
Well worth your time
Michael S.
4.8
As I already mentioned...basic ADS-B course great for those who know very little about ADS-B.
David D.
5
Great overview class of ADS-B.
Wendy G.
5
take notes.
Caroline K.
5
Very helpful for installers
Mynor M.
5
to retake this course, which is very helpful
Kennedy M.
5
Worth attending
Dwight A.
5
This course provides an excellent introduction to the nascent avionics technician and will upgrade the skill set of an experienced avionics technician with respect to the ADS-B system.
Susan H.
5
Excellent class, gives good overview and detail of ADS-B installation, testing and troubleshooting.
stephen k.
4.4
overall, the class was good
Michael D.
4.8
Overall good information for the beginner
Maddison B.
5
Great insight into ADS-B systems.
Antonio V.
5
That it is very important to take it in order to find easy mistakes that are pretty easy to fix in order to avoid FAA letters for our customers
Daniel G.
4.4
Excellent for beginners and seasoned avionics techs
Patrick C.
5
A good course to take
Arturo V.
4.8
pay attention
Erik N.
4.8
Fantastic.
Jean-Francois M.
4.8
Go take it, knowing why and how the system was implemented helps understanding where its going
Harris M.
5
A must attend
Miguel Angel H.
5
Great course... take it!!!
Marcelo J.
5
It's a great course that explains not only the basics about ADS-B configuration but also explains in depth the ADS-B Testing procedures and troubleshooting
Steven G.
4.4
Bring some snacks
Mari B.
5
Valuable information for understanding the concept of ADS-B, and making troubleshooting easier.
Matthew K.
5
Good class. Take notes.
Christopher S.
5
It is worth it to take this course even if you have a lot of experience. Instructors and other students always have scenarios that most other people do not encounter. Sharing this information is great for this course.
Geanovea W.
5
Definitely needed for young avionics technicians, and for the experienced, it is an excellent refresher with additional information you probably don't know already and surely will need.
paul m.
5
great class
Jonathan F.
5
A must for new avionics techs!
Lewis F.
5
Instructor was very knowledgeable and easy to follow
Taylor K.
5
It was very informative for technicians that are already experienced. It would be harder for someone just getting into avionics.
Jason T.
4.8
Prepare for a lot of ADS-B info
Aaron W.
4.8
Pay attention lots of information
William L.
5
Very good
James H.
5
You will learn ADS-B
Ryan P.
4.8
It is a good overview. Be sure to come into the course with, at minimum, a broad or basic knowledge base of ADS-B
Chris L.
5
If you want to learn everything about ADS-B take this class
Skyler H.
5
very informative
Robert G.
5
A good class for techs of all experience levels
José P.
5
You cannot miss it, it guides you on technical documentation, to solve faults, certainty about the 19 parameters that must be checked.
Travis P.
5
This is a great class that will help everyone with ADS-B. Even if you think you know the system, this class will teach you something.
Stephen K.
5
Good stuff! Instructor knows his stuff.
Christopher S.
4.8
I would say they need to ask questions. The more questions they would ask during the class, the more information they will get out of it. For instance, one of my classmates was able to get me the part number for the antenna coupler so I can see about getting one of our work area.
Manuel V.
5
This is a great introduction to ADS-B. A lot better than reading from a textbook.
Randy S.
5
Very good course for techs new to ADS-B system and also helpful as a refresher course to aid in troubleshooting existing installations.
Jerry S.
5
If you wish to learn the correct and regulatory procedure to install, troubleshoot and certify ADS-B avionics installations, look no further. This AEA course is specifically designed for you!
John S.
5
Staff was very knowledgeable of the topics discussed, don't hesitate to ask questions. If an answer isn't immediately known, every effort will be made to find you the answer.
Humberto C.
5
that this course is highly recommended as it analyzes the important points of the system update ADS-B-Out.
Corey R.
4.6
Well worth the time and money
Jose M.
5
Awesome
Ismael G.
5
I will recommend it
Rodrigo Guillermo R.
4.8
Very helpful tool to learn how ADS-B works
Other Upcoming Courses
AVX-10K & IFR6000/4000 Operations Training
This course is designed to provide maintenance personnel with the knowledge and skills required to operate and configure IFR6000 & IFR4000 to verify and maintain transponder, UAT, TCAS, DME, ILS, VOR, Comms and ELT. Plus a complete review all features and benefits of the AVX-10K Flight Line Test Set with emphasis on testing transponder (Mode S and ADS-B In/Out), UAT, TCAS and DME.
Digital Databus Theory & Analysis
VIRTUAL-LIVE COURSE
As today’s modern airplanes become much more technologically advanced, so must the professionals that maintain them. The advanced avionics and instrumentation systems used in these aircraft rely on various forms of digital databus communication. Understanding digital databus theory is becoming more and more important for avionics technicians, and even A&P mechanics, to effectively test and troubleshoot these highly advanced aircraft systems.
Basic Wiring & Avionics Installation
The Basic Wiring & Avionics Installation course is designed for certificated repairmen, new avionics technicians, aviation maintenance technicians and recent graduates interested in improving or acquiring the skills necessary to perform avionics installations. This three-day seminar employs in-depth theory and hands-on lab exercises to immerse the attendee in the best practices used to plan, manage, and install a general aviation avionics panel. Installation lab includes: Avidyne IFD540 FMS/GPS Navigator, Garmin G5 Electronic Flight Instrument & GAD 29 ARINC 429 data bus module, PS Engineering PMA8000BT Audio Panel and Trans-Cal SSD120-35C-RS-232 Altitude Encoder
Basic Pitot-Static & Transponder Theory, Testing & Troubleshooting
Special Note: Representatives from VIAVI Solutions with the AVX-10K and Tel-Instruments Electronics Corp. with the SDR-OMNI will be in attendance on day 2 to demonstrate operations and answer questions.
The Basic Pitot-Static & Transponder course is designed for entry-level avionics technicians or those looking for basic training on pitot-static & aircraft transponder systems. This two-day course covers the history and theory of operation of pitot-static instruments and transponders, as well as system set-up, hands-on testing, and the troubleshooting skills necessary to perform FAR 91.411 and 91.413 checks.
Aircraft Instrument Systems
VIRTUAL-LIVE COURSE
This course is designed for avionics technicians or apprentices who want to learn more about aircraft instrument systems and better understand their operation, installation considerations, and maintenance to become more effective troubleshooters. From simple mechanical gauges to complex electrical and electronic systems, this course covers nearly every instrument system in an aircraft.
AET Prep Course & Exam
VIRTUAL-LIVE COURSE
The Aircraft Electronics Technician (AET) Prep Course is a virtual-live class for aviation technicians who want to earn their NCATT AET certification. Students who register in advance will have access to online modules to self-study the AET coursework before attending the one-day virtual-live class. The online modules take approximately two weeks to complete. After the course, students will be fully prepared to take the AET certification exam. The $175 value for the exam is included in the course registration. Upon registration, instructions to access the AET Prep online modules will be emailed to the attendee.
Note: Upon registration, instructions to access the AET Prep online modules will be emailed to the attendee.
Certified Repair Station Training
This weeklong course provides an interactive environment to learn, understand and implement the regulations that govern repair station design and operations.
Avionics Installation for Experimental Aircraft
This course is targeted for the home builder or avionics technician who wants to learn about performing an avionics installation in an experimental aircraft. The class focuses on the Garmin G3X Touch system, and a simplified example harness is constructed as part of the hands-on portion of the class. While the G3X Touch system is the primary focus, the wiring principles and general guidance can be applied to any experimental avionics system. From the do-it-yourselfer to the avionics shop looking to carve out a niche, this class has something for everyone.
Primary Flight Display Installation & Configuration
Technicians will learn how to plan, install, interface, configure and check out an installation of a primary flight display, EHSI and GPS/Nav/Com consisting of dual Garmin GI 275, a Garmin GTN 650 touch screen, and a Garmin GTX 345 transponder. Designed for technicians who have experience with avionics installation practices and are looking for more training integrating common general aviation installations.
Avionics Service and Testing Fundamentals
Build and Keep Your Test Panel & Harness!
This intensive three-day course is designed for experienced avionics technicians seeking comprehensive training in avionics testing, troubleshooting, and service. Led by industry expert Don Dominguez of Radioman Avionics, participants will gain hands-on experience in bench testing LRUs, flight line testing, and aircraft troubleshooting across various avionics systems. From fundamental concepts to advanced techniques, this course covers a wide range of topics including navigation, communication, and transponder equipment service.
Pitot-Static, Transponder, RVSM, and ADS-B: Testing & Inspection
Attendees will learn the proper methods for conducting pitot-static and transponder tests and inspections. This two-day course offers a regulatory review and an explanation of the proper administrative procedures for completing these critical certifications. Preparing and performing RVSM inspection tasks. ADS-B session covering installation, wiring and return to service review.